Search
Now showing items 1-10 of 30
On the aero acoustic and internal flows structure in a centrifugal compressor with hub side cavity operating at off design condition
(Science Direct, 2017-01)
This paper covers the characterization of the acoustic noise and the unsteady flow field of a high speed centrifugal compressor NASA CC3. In order to accurately predict the noise, all analyses are carried out through the ...
A robust modification to the universal cavitation algorithm in journal bearings
(The American Society of Mechanical Engineers, 2016-11)
In the current study, a modified fast converging, mass-conserving, and robust algorithm is proposed for calculation of the pressure distribution of a cavitated axially grooved journal bearing based on the finite volume ...
Cement flow during impaction allografting: a finite element analysis
(Science Direct, 2016-02)
Cement intrusion into cancellous or impacted bone is not well understood. We adopted an engineering mechanics approach to predict the effect of surgical variables on the cement intrusion into impacted cancellous bone, used ...
Unsteady CFD simulation for high speed centrifugal compressor operating near surge
(Digital Collection: American Society of Mechanical Engineers, 2014-09)
Centrifugal compressor surge and stall are an instabilities flow and system phenomenon, which can lead to a loss of engine power, large pressure transients and, in some cases, failure of the compressor and bearing system. ...
Finite element and analytical modelling of a tractor-semitrailer vehicle
(Science Direct, 2003-02)
A tractor-semitrailer vehicle travelling over a random road surface is modelled using finite element and analytical methods. The vehicle's linear models are constructed in such a way as to describe the bounce and pitch ...
Guide roll simulation in FE analysis of ring rolling
(Science Direct, 2003-05)
A new method (thermal spokes) has been proposed to simulate the guide roll effect in FE analysis of the ring rolling process. The method is simple to use with existing FE formulations, does not introduce further nonlinearities, ...
Self-heat generation in piezoelectric stack actuators used in fuel injectors
(IOPScience, 2009-03)
Multilayer piezoelectric actuators are used in fuel injectors due to their quick response, high efficiency, accuracy, low power consumption, and excellent repeatability. Experimental results for soft lead zirconate titanate ...
Finite element modelling of crack growth and wear particle formation in sliding contact
(Science Direct, 2001-10)
Two steel surfaces in sliding contact are examined analytically and experimentally. The experiments are restricted to the reciprocating sliding of a relatively hard circular cylinder on a soft plane but the analytical model ...
Quasi-static thermo-electro-mechanical behaviour of piezoelectric stack actuators
(IOPScience, 2008-01)
Smart Materials and Structures
Quasi-static thermo-electro-mechanical behaviour of piezoelectric stack actuators
F X Li1, R K N D Rajapakse1, D Mumford2 and M Gadala1
Published 17 January 2008 • IOP Publishing Ltd
Smart ...
Centrifugal compressor spiral dry gas seal simulation working at reverse rotation
(Science Direct, 2013-01)
Unidirectional dry gas seal may experiences reverse rotation when equipped in a centrifugal compressor. This paper describes how the reverse rotation effects on the spiral unidirectional dry gas seal performance and pressure ...