Show simple item record

dc.contributor.authorMovahhedy, M. R.
dc.contributor.authorAltintas, Y.
dc.contributor.authorGadala, Mohamed S.
dc.date.accessioned2021-12-27T17:05:26Z
dc.date.available2021-12-27T17:05:26Z
dc.date.issued2002-04
dc.identifier.urihttps://dspace.adu.ac.ae/handle/1/2014
dc.descriptionMovahhedy, M. R., Altintas, Y., & Gadala, M. S. (2002). Numerical analysis of metal cutting with chamfered and blunt tools. J. Manuf. Sci. Eng., 124(2), 178-188.en_US
dc.description.abstractIn high speed machining of hard materials, tools with chamfered edge and materials resistant to diffusion wear are commonly used. In this paper, the influence of cutting edge geometry on the chip removal process is studied through numerical simulation of cutting with sharp, chamfered or blunt edges and with carbide and CBN tools. The analysis is based on the use of ALE finite element method for continuous chip formation process. Simulations include cutting with tools of different chamfer angles and cutting speeds. The study shows that a region of trapped material zone is formed under the chamfer and acts as the effective cutting edge of the tool, in accordance with experimental observations. While the chip formation process is not significantly affected by the presence of the chamfer, the cutting forces are increased. The effect of cutting speed on the process is also studied.en_US
dc.language.isoenen_US
dc.publisherAmerican Society of Mechanical Engineersen_US
dc.subjectMachiningen_US
dc.subjectMachine toolsen_US
dc.subjectCuttingen_US
dc.subjectNumerical analysisen_US
dc.subjectFinite element analysisen_US
dc.titleNumerical analysis of metal cutting with chamfered and blunt toolsen_US
dc.title.alternativeJ. Manuf. Sci. Eng. May 2002, 124(2): 178-188 (11 pages)en_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.1115/1.1445147


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record