Show simple item record

dc.contributor.authorFuchang Xu
dc.contributor.authorGadala. Mohamed S
dc.identifier.citationXu, F., & Gadala, M. S. (2005). Investigation of error sources in temperature measurement using thermocouples in water impingement cooling. Experimental heat transfer, 18(3), 153-177.en_US
dc.description.abstractThe reliability of thermocouples with separation measuring junction in temperature measurement in the cooling process of hot steel plates with impingement jet has been investigated using direct and inverse finite element analysis (FEA). It is concluded that while the attachment of thermocouple wires on surface has negligible influence on surface temperature distribution during air cooling, the conduction of wires in a jet impingement water cooling process has significant effect on the measured temperature. The disturbance of the temperature field due to the introduction of a small hole for the installation of internal thermocouple has also been studied and showed similar but less pronounced effects to those of the surface measurement. An increased distortion of the temperature field is evident when the thermocouple is attached on the top surface directly above the bottom surface of hole.en_US
dc.publisherTaylor and Francisen_US
dc.subjectTemperature Measurementen_US
dc.subjectImpingement coolingen_US
dc.subjectFinite elementsen_US
dc.titleInvestigation of error sources in temperature measurement using thermocouples in water impingement coolingen_US
dc.title.alternativeExperimental Heat Transferen_US

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record